Designing a simple electrospinning device to produce nanofibers from polymeric and organic sources

joseph shenekji; Kamar Shayah; Angela  Sarkis; Naya Zghen Kalala; Alice keakaty

doi:10.47419/bjbabs.v5i04.305

Authors

Dr.joseph shenekji University of Aleppo, Faculty of Technical Engineering, Dept. Biotechnology Engineering https://orcid.org/0009-0004-0683-1830
Kamar Shayah University of Aleppo, Faculty of Technical Engineering, Dept. Biotechnology Engineering https://orcid.org/0009-0001-6285-7363
Angela Sarkis University of Aleppo, Faculty of Technical Engineering, Dept. Biotechnology Engineering https://orcid.org/0009-0006-9305-7613
Naya Zghen Kalala University of Aleppo, Faculty of Technical Engineering, Dept. Biotechnology Engineering https://orcid.org/0009-0001-7846-1187
Alice keakaty University of Aleppo, Faculty of Technical Engineering, Dept. Biotechnology Engineering https://orcid.org/0009-0000-4594-2833

DOI:

https://doi.org/10.47419/bjbabs.v5i04.305

Keywords:

Nanofibers, Electrospinning, Honey, PVP, Hyaluronic acid, Gelatin

Abstract

Electrospinning is one of the important technologies that has contributed a lot to the development of science. Electrospinning usually requires an electrical voltage generator with a value of 10–60 kilovolts, and this voltage requires expensive and energy-consuming electrical devices. The raw materials of nanofibers usually use various polymeric materials, but mixing polymeric materials and finding a stable mixture with the desired properties is difficult and requires many experiments and studies. In this research, a safe electrospinning system with capabilities similar to those of a standard electrospinning device applying a mixture of PVP and honey that can be further tested in wound healing was being constructed. Several mixtures were tested to see which one is more approachable and materials to construct the electrospinning device included lithium battery and medical syringe and an energy booster with an aluminum foil and a rubber band to create a steady flowrate of the polymer. The method described achieved a successful formation of nanofibers by electrospinning using honey and PVP 1:1 and PVP 40%, and the designed device is portable and can be installed in any part of the laboratory, whether large or small making nanofibers production more democratized to low-income countries and labs with minimal budgets.

Metrics

Metrics Loading ...

Downloads

Download data is not yet available.

References

Keirouz A, Wang Z, Reddy VS, Nagy ZK, Vass P, Buzgo M, et al. The history of electrospinning: Past, present, and future developments. Advanced Materials Technologies. 2023;8(11):2201723–2201723. doi.org/10.1002/admt.202201723. DOI: https://doi.org/10.1002/admt.202201723

Ramakrishna S, Fujihara K, Teo WE, Yong T, Ma Z, Ramaseshan R. Elec- trospun nanofibers: solving global issues. Materials Today. 2006;9:40–50. doi.org/10.1016/S1369-7021(06)71389-X. DOI: https://doi.org/10.1016/S1369-7021(06)71389-X

Liu H, Zhu Y, Zhang C, Zhou Y, Yu DG. Electrospun nanofiber as building blocks for high-performance air filter: A review. Nano Today. 2024;55:102161–102161. doi.org/10.1016/j.nantod.2024.102161. DOI: https://doi.org/10.1016/j.nantod.2024.102161

Zhang Z, Liu H, Yu DG, Bligh SW. Alginate-Based Electrospun Nanofibers and the Enabled Drug Controlled Release Profiles: A Review. Biomolecules. Jul. 2024;3(7):789–789. doi.org/10.3390/biom14070789. DOI: https://doi.org/10.3390/biom14070789

Xue J, Wu T, Dai Y, Xia Y. Electrospinning and electrospun nanofibers: Methods, materials, and applications. Chemical reviews. ACS Publications Most Trusted Most Cited Most Read. 2019;119:5298–415. doi.org/10.1021/acs.chemrev.8b00593. DOI: https://doi.org/10.1021/acs.chemrev.8b00593

Dadol GC, Kilic A, Tijing LD, Lim KJ, Cabatingan LK, Tan NP, et al. Solution blow spinning (SBS) and SBS-spun nanofibers: Materials, methods, and applications. Materials Today Communications. 2020;25:101656–101656. doi.org/10.1016/j.mtcomm.2020.101656. DOI: https://doi.org/10.1016/j.mtcomm.2020.101656

Nosrati H, Khouy A, Nosrati R, Khodaei A, Banitalebi-Dehkordi M, Ashrafi- Dehkordi M, et al. Nanocomposite scaffolds for accelerating chronic wound healing by enhancing angiogenesis. Journal of Nanobiotechnology. 2021;19:1–21. doi.org/10.1186/s12951-020-00755-7. DOI: https://doi.org/10.1186/s12951-020-00755-7

Barraza RDV, Álvarez Suarez, Gómez ASV, J L, González P, Iglesias JA, et al. Design- ing a low-cost electrospinning device for practical learning in a bioengineering biomaterials course. . Revista mexicana de ingeniería biomédica. 2016;37:7–16. doi.org/10.17488/RMIB.37.1.1.

Bozhenkov S, Starikovskaia S, Sechenov V, Starikovskii A, Zhukov V. Com- bustible mixtures ignition in a wide pressure range. Nanosecond high-voltage dis- charge ignition. In41st Aerospace Sciences Meeting and Exhibit. 2003;p. 876–876. doi.org/10.2514/6.2003-876. DOI: https://doi.org/10.2514/6.2003-876

Ji D, Lin Y, Guo X, Ramasubramanian B, Wang R, Radacsi N, et al. Elec- trospinning of nanofibres. Nature Reviews Methods Primers. 2024;4(1):1–1. doi.org/10.1038/s43586-023-00278-z. DOI: https://doi.org/10.1038/s43586-023-00278-z

Shen CL, Liang TC. Design and Implementation of a High-Voltage Gen- erator with Output Voltage Control for Vehicle ER Shock-Absorber Applica- tions. Mathematical Problems in Engineering. 2013;2013(1):324590–324590. doi.org/10.1155/2013/324590. DOI: https://doi.org/10.1155/2013/324590

Duizer LM, Robertson T, Han J. Requirements for packaging from an ageing consumer’s perspective. Packaging Technology and Science. An International Journal. 2009;22(4):187–97. doi.org/10.1002/pts.834. DOI: https://doi.org/10.1002/pts.834

Long YZ, Yan X, Wang XX, Zhang J, Yu M. Electrospinning: the setup and procedure. InElectrospinning. Nanofabrication and applications. 2019;p. 21–52. doi.org/10.1016/B978-0-323-51270-1.00002-9. DOI: https://doi.org/10.1016/B978-0-323-51270-1.00002-9

Abdulkadhim MK, Habeeb SA. The possibility of producing uniform nanofibers from blends of natural biopolymers. Materials Performance and Characterization. 2022;11:313–336. doi.org/10.1520/MPC20220045. DOI: https://doi.org/10.1520/MPC20220045

Kurakula M, Rao GK. Moving polyvinyl pyrrolidone electrospun nanofibers and bio-printed scaffolds toward multidisciplinary biomedical applications. European Polymer Journal. 2020;136:109919–109919. doi.org/10.1016/j.eurpolymj.2020.109919. DOI: https://doi.org/10.1016/j.eurpolymj.2020.109919

Kassem LM, El-Deen AG, Zaki AH, El-Dek SI. Electrospun manuka honey@ PVP nanofibers enclosing chitosan-titanate for highly effective wound healing. Cellulose. 2023;30(10):6487–505. doi.org/10.1007/s10570-023-05267-9. DOI: https://doi.org/10.1007/s10570-023-05267-9

Li T, Sun M, Wu S. State-of-the-art review of electrospun gelatin-based nanofiber dressings for wound healing applications. Nanomaterials. 2022;12(5):784–784. doi.org/10.3390/nano12050784. DOI: https://doi.org/10.3390/nano12050784

Kodavaty J. Poly (vinyl alcohol) and hyaluronic acid hydrogels as potential biomaterial systems comprehensive review. Journal of Drug Delivery Science and Technology. 2022;71:103298–103298. doi.org/10.1016/j.jddst.2022.103298. DOI: https://doi.org/10.1016/j.jddst.2022.103298

Mieles Y, Vyas J, Aslan C, Humphreys E, Diver G, Bartolo C, et al. Honey: An advanced antimicrobial and wound-healing biomaterial for tissue engineering applications. Pharmaceutics. 2022;14(8):1663–1663. 10.3390/pharmaceutics14081663. DOI: https://doi.org/10.3390/pharmaceutics14081663

Dichtel CR, Dichtel JR, Dichtel WR. Experimental measurement of the diameter of a human hair via two-color light diffraction. Psychiatry. 2023;3(3):267–70. doi.org/10.1080/00332747.2020.1768008. DOI: https://doi.org/10.1080/00332747.2020.1768008